Latest Evolution Firmware for the EDS8PR, EDS16PR and EDS32PR
What is the latest version of Evolution firmware for the EDS8PR, EDS16PR and EDS32PR?
The current released version of Evolution firmware for the EDS8PR, EDS16PR and EDS32PR is 6.0.0.0R5
VERY IMPORTANT NOTE: The EDS8PR, EDS16PR, and EDS32PR is not the same product as the (EDS 3008PR, EDS 3016PR, and EDS 3032PR)
DO NOT load this firmware on those newer products or vice versus as it will result in the unit becoming non-functional.
Due to changes in the memory allocation and operating system of the EDS, the upgrade procedure varies depending on the version the EDS is currently running.
If you are running firmware earlier than v4.0.0.0 start here:
A Special Upgrade Process For External Evolution Products For Version 4.0.0.0
If you are running v4.0.0.0, start here:
V6.0.0.1R2 for EDS4100, EDSx_PR and EDSxPS
If you are running v4.1.0.2, start here:
Firmware upgrade procedure for Evolution EDS products from v4.1.0.2 to v5.2.0.0R24 or later
If you are running v5.2.0.0 or higher, you need only download the firmware file (edspr_x_x_x_x_xx.romz) below and not the boot loader file. Update using the instructions in the User Guide on page 141.
https://www.lantronix.com/wp-content/uploads/pdf/EDS_UG.pdf
Attempting to upgrade directly from 2.x or v3.x to v4.1.0.2 or higher will cause the EDS to stop functioning. If this happens, the only resolution is to replace the EDSxPR. If the EDSxPR is out of warranty you will need to purchase a new unit.
Please click on one of the links below to download EDSxPR firmware via FTP or HTTP:
| Product | Download via FTP | Download via HTTP | Comment |
| EDSxPR Firmware | FTP | HTTP | Right-click and choose "Save Link As..." |
| EDSxPR Boot Loader | FTP | HTTP | Right-click and choose "Save Link As..." |
| Release Notes | FTP | HTTP | Right-click and choose "Save Link As..." |
| MD5 Checksum | FTP | HTTP | Right-click and choose "Save Link As..." |
[Originally Published On: 02/06/2007 10:34 AM]