/
How do I enable or disable PWEN OEM factory defaults (Internal)
How do I enable or disable PWEN OEM factory defaults (Internal)
How do I enable or disable PWEN OEM factory defaults
PWEN OEM factory defaults enable/disable
If he wants to do a reset to Lantronix Factory Defaults he has first to disable the OEM factory defaults and then do a reset to factory defaults.
Downside is that you are losing the OEM Factory defaults.
Disabling the OEM Factory defaults can be done only through the CLI
>ena
(enable)#dev
(device)#oem-config
(oem-config)#no oem config
(oem-config)#write
A reset to factory defaults will put the device into the standard Lantronix configuration
[Originally Published On: 06/11/2015 05:18 PM]
, multiple selections available,
Related content
Setting an xPico to factory defaults
Setting an xPico to factory defaults
More like this
xPico - Resetting to factory defaults
xPico - Resetting to factory defaults
More like this
Resetting an EDS4100 to Factory Defaults
Resetting an EDS4100 to Factory Defaults
More like this
Resetting UDS, XPort-03-04s and similar products to factory defaults
Resetting UDS, XPort-03-04s and similar products to factory defaults
More like this
Setting a Spider to factory defaults from the serial console port
Setting a Spider to factory defaults from the serial console port
More like this
Reset a Spider to factory defaults using the serial console port and the Reset button
Reset a Spider to factory defaults using the serial console port and the Reset button
More like this