What is the latest firmware version for ETS4P Multiport Device Server?

---

Version V3.6/4
July 12, 2000

Copyright 2000, Lantronix

Release Summary
===============

These release notes will document new features added and problems corrected
since the V3.6/3 software release.

New Features
============

Telnet support has been modified to convert a <CR><LF> in the network
data stream into a single <CR> when transmitted out a serial port.
This should allow telnet implementations that send <CR><LF> when the
user presses just <CR> to work correctly when connected to remote
device console ports.

UDP connections are now enabled for the ETS4/8/16P and ETS16/32PR terminal
servers.

The ability to see the depth of UDP packet queues has been added to
the netstat command.

Resolved Problems
=================
These problems have been corrected since the V3.6/3 software release.

On the EPSn-100 units if serial characters were received on the console
port while the unit booted, the serial port would not operate correctly.

When authenticating into a Netware V5 NDS tree, under certain conditions
memory could be corrupted during the authentication phase and units would
crash.

If DHCP was enabled on a unit previously configured with an IP
address/subnet mask pair, and the unit failed to receive a DHCP
response, the subnet mask was incorrectly restored to the natural
(class A, class B or class C) default subnet mask.

When issuing a DHCP request, do not ask for any specific time on the
lease, as some DHCP server implementations will blindly respond with
the lease time requested rather than the lease time specified in
configuration files.

IP security has been enabled for the EPS2-100 and EPS4-100.

==================================================

DOWNLOAD FULL RELEASE NOTES

DOWNLOAD ETS4P FIRMWARE V3.6/4 BINARY

---

[Originally Published On: 09/02/1999 02:20 PM]