Latest Firmware for the PremierWave XN
What is the latest firmware for the PremierWave XN?
The current released version of firmware for the PremierWave XN is v8.1.0.3R1.
To download the latest version of Firmware and Release Notes select the link below
Section I - Interim Upgrader Firmware
If you are running a 7.9 firmware version, you must load the Interim Upgrader below, then the firmware file under Section II. See the Upgrade Note. The Upgrade Note was written for the 8.0.0.1R1 firmware, but applies to the 8.1.0.3R1 firmware, as well.
If you are already running 8.0.0.1R1 or higher, skip to Section II.
| File | Comment |
| Interim Upgrader for Base Firmware | |
| Interim Upgrader for Base+Python Firmware | |
| Firmware Release notes | Right-click and choose "Save Target As..." |
| Upgrade Note | Right-click and choose "Save Target As..." |
| SHA Checksum for Base Interim Upgrader | Right-click and choose "Save Target As..." |
| SHA Checksum for Base+Python Interim Upgrader | Right-click and choose "Save Target As..." |
Section II - 8.1.0.3R1 Firmware Upgrade Files
Base Firmware with Python
| File | Comment |
| Firmware | |
| Firmware Release notes | Right-click and choose "Save Target As..." |
| Upgrade Note | Right-click and choose "Save Target As..." |
Base Firmware
| File | Comment |
| Firmware | |
| Firmware Release notes | Right-click and choose "Save Target As..." |
| Upgrade Note | Right-click and choose "Save Target As..." |
Python Add-on to Base Version:
If you have a PremierWave XN running the Base Version of firmware you can use the procedure in the Add-on Upgrade Note below to add Python. The note references 8.0.0.0 firmware, but the procedure applies to the 8.1.0.1R3 firmware, as well.
| File | Comment |
| Add-on | |
| Add-on Upgrade Note | Right-click and choose "Save Target As..." |
[Originally Published On: 02/29/2012 12:20 PM]