Spider and Spider Duo Supported Resolutions
- Jane
Analytics
I am unable to see the KVM console window in my Spider. When attempting to launch the window I get a black screen.
The Spider and Spider Duo can only recieve and interpret the video signal being output by the computer the Spider is attached to. There is no option in the Spider to change the resolution that is being displayed. Therefore, the computer output should be in the supported resolutions Below is a table showing the supported resolutions and Hz.
Note: The Spider and Spider Duo devices do not support Wide screen format.
Table C-1 Supported Video Resolutions and Refresh Rates
Resolution (x,y) |
Refresh Rates (Hz) |
640x340 |
70, 85 |
| 640x400 | 56,85 |
| 640x480 | 60, 67, 72, 75, 85 |
| 720x400 | 70, 85 |
| 800x600 | 56, 60, 70, 72, 75, 85 |
832x624 |
75 |
| 1024x768 | 60, 70, 72, 75, 85 |
| 1152x864 | 75 |
| 1152x870 | 75 |
| 1152x900 | 66, 76 |
| 1280x960 | 60 |
| 1280x1024 | 60 |
1600x1200 |
60 Note: The 1600x1200 resolution and 60 Hz refresh rate is supported by the SpiderDuo device without conditions. If a Spider device hardware is revision G22, G23, E21 or higher, it will also support up ot 1600 x 1200 at 60 Hz. If the Spider device is an earlier revision, it will only support up to 1280 x 1024 at 60 Hz. The hardware revision number can be located on the Spider device Product Information Label. |
This table can be found in the Spider User Guide on page 127.
[Originally Published On: 03/22/2016 02:07 PM]