Spaces
Apps
Templates
Create
Lantronix Tech Support
All content
Space settings
Shortcuts
How-to articles
How-to articles
This trigger is hidden
Content
Results will update as you type.
Show more above
•
Loading Evolution Firmware via FTP from a Windows command prompt
•
Loading firmware onto an SLC-SLB-SLC8000
•
Loading SLC or SLB firmware from the USB connector on the front panel
•
Loading SLC-SLB firmware version 6.1.0.0 or higher from an image file
•
Loopback Testing for UDS1100 in RS485 4-wire or 2-wire Mode
•
LPM will not start in Fedora and Ubuntu
•
MAC address transition of CoBos device servers
•
Manually adding a printer in the 5.1.0-17 firmware for the xPrintServer Office (XPS1002FC-02-S)
•
MatchPort b-g® loses WiFi connection at high ambient temperatures
•
Menu Creation on an SLC
•
Micro - Pinouts and Board Diagrams
•
Micro125 Reset input level
•
Modbus Serial Tunnel
•
Modems - Using the SCSx00 Without Modems
•
Monitor Firmware Upgrade On An Evolution OS Product
•
Monitor Mode on Cobos device servers
•
Mounting Dimensions for XPress-Pro SW 92000 X9294PMKT-01 Panel Mount Kit
•
MSS4 & SCS400 - Ports 1 & 2 work OK, 3 & 4 don't communicate
•
MTBF of selected current Lantronix products
•
MTBF of selected discontinued Lantronix products
•
No Network Connectivity When POE (Power Over Ethernet) Sensing Equipment Is Installed
•
Non-compliant USB Type-C cables with the SLC8000 USB module
•
Online Video Tutorials
•
Opening and Terminating an ssh connection to SLCs and SLBs in Unix-Linux and Windows.
•
Opening BIOS setup mode on a motherboard that supports serial Console Redirection
•
Opening Monitor Mode on CoBos device servers including UDSs, Xport-03-04s-05s, xPico, XPress-DRs, WiBoxes, etc.
•
Panel cut-out dimensions for network jack of XPort-03-04 and XPort-Pro
•
Password prompt for Web interface of CoBos products running v6.x firmware or higher
•
Password requirements and limitations for the Spider
•
Permitted and Unusable Characters for Wireless Encryption Using Passphrase Key on a MatchPort b-g Pro
•
Pin Pitch & Length of the IDC10 Header on an MSSLite-C
•
Pinouts and wiring diagrams for current Lantronix serial adapters, 200.2066A, 200.2067A, 200.2069A, 200.2070A, 200.2071, 200.2072, 200.2073, 200.2074 & ADP010104-01
•
Pinouts for XPress-DR and XPress-DR-IAP RJ45 serial port to go to a DB9 Connector
•
Polarity of power plug on a UDS
•
Power Connectors for -48Vdc console servers
•
Power supply barrel connector size and polarity
•
Pre-v6.1.0.0 Image files for SLC-SLB
•
PremierWave XN - Access to the unit to configure the WLAN
•
PremierWave XN - Antenna 1 and Antenna 2
•
Printing from a Mac running OS X 10.9 or higher
•
Problems installing Modbus and using with ComPort Redirector
•
Problems sending data containing 0xFF and-or CR
•
Proper Upgrade Procedure from Redirector to CPR
•
PuTTY drops SSH connections to EDS Multiport device server with the error "Server sent disconnect message type 2(protocol error);" Sorry"
•
Rebooting A Cobos Device server
•
Recovering from a lost password on a X94000001-01 XPress-Pro SW 94000
•
Removing Unneeded Inaccessible Lantronix Virtual Com Ports in the CPR and SCPR and Uninstalling the CPR and SCPR
•
Replaceable fuses for Lantronix SLP Remote Power Management servers
•
Requirements or Limitations for Passwords for the User accounts on SLC, SLC 8k, or SLB Products
•
Reset a Spider to factory defaults using the serial console port and the Reset button
•
Reset sysadmin and root passwords on SCSx05 and SCSx20 products
•
Resetting the telnet password on UDS-SDS-CoBox devices
•
Resetting UDS, XPort-03-04s and similar products to factory defaults
•
Restoring the MAC address on a Spider
•
Restoring the MAC-address of a Xport
•
RF power output of Lantronix wireless products
•
RJ45 Serial Loopback Connector
•
RJ45 Serial Pinouts and cables for Lantronix console and device servers
•
RS232 - DTE and DCE connectors
•
RS232 Serial Cable Wiring
•
RS485 & RS422 - When is termination required?
•
RS485 signal polarity
•
RS6000 (AIX) Console Connection Cable Wiring
•
SCSx05 and SCSx20: syslog kernal logging information to another host
•
Secure LDAP (LDAPS) on an SLC or SLC8000
•
Sending a Break Through a Telnet Socket Connection in Windows #2
•
Sending HTTP GET-commands from an embedded microcontroller or FPGA connected to a Cobos based Device Server like the Xport to a web server
•
Serial Port Framing Errors
•
Serial port pinout for SGX 5150 RS485 2 Wire, RS485-422 4 Wire, RS-232 Mode
•
Serial Protocol Comparisons
•
Serial Tunnel between CoBos device server and an MSS
•
Serial tunnel between two Evolution device servers
•
Serial tunnel between two PremierWave Evolution device servers
•
Serial tunnel using UDP broadcast with XPort-WiPort-CoBox
•
Setting a Spider to factory defaults from the serial console port
•
Setting an xPico to factory defaults
•
SGX5150-PW2050 Cannot Reboot to Standalone Firmware Installer Using wlan0 IP
•
Share a specific printer or printers when the xPrintServer discovers multiple printers
•
Size of the TCP buffers on CoBos products?
•
SLC - Using Windows IAS with RADIUS on an SLC
•
SLC & SLB - Disabling the break sequence from the command line
•
SLC 8000 Dual Ethernet
•
SLC 8000 USB drivers
•
SLC and SLB serial numbers
•
SLC boot bank, switching, copying
•
SLC Firmware version v5.2a for SLC-01, SLC-02 and SLB-01 (with PC card slots)
•
SLC Model Number changes after firmware upgrade
•
SLC-SLB firmware upgrade from CLI via ftp, sftp or tftp, console port
•
SLC: Do not assign IP addresses on the same subnet to both ethernet ports
•
SLCxx-SLB884 Password Recovery when front panel is disabled or front panel password is unknown
•
SLP Current Rating
•
SLP does not power up out of the box
•
SLP Vampire Power Consumption (ie, Current Draw)
•
SLS Spider Input Power Requirements
•
SmartRoam on Lantronix WiFi device servers
•
SMTP email server for XPort and XPort Pro Evolution
•
SNMP MIBs Supported by CoBos
•
SNMP trap configuration on an SLM
•
Some causes of data loss on Telnet connection
•
Spider – Keyboard and Mouse not working on Red Hat Enterprise Linux 3 and 4
•
Spider and Spider DUO - I get a Java security warning when I try to open the KVM Console
•
Spider and Spider Duo Supported Resolutions
•
Spider USB cables - are both needed?
•
SSH key For Spider-Spider Duo
•
SSH Password Authentication Method does not work in SecureCRT
•
Step-by-step SLC and SLB configuration
•
Syslog facilities on SLCs
•
TCP connection from a Windows Server takes about 9 seconds to establish - ECN
•
TCP Keepalives explained
•
Technical Application Notes Page on Lantronix.com
•
Testing the serial port on a UDS, SDS, WiBox or xDirect with an RS232 loopback jumper
•
Throughput For XPort with Encryption and Without Encryption
•
Trouble Shooting Lantronix Legacy and Discontinued Print Servers, EPS, MPS, LPS (NOT xPrintServer)
•
Troubleshooting RS485 Connections
•
TTL to RS232 Interface for CoBox Micro and Mini
•
Twisted Pair Ethernet Cable Color Coding
•
Types Of Antennas For Lantronix Wireless products
•
UDS10 - RS485-RS422 pinout
•
UL Certifications
•
Unable to browse to end device interface from SLM interface
•
Unable to Update Firmware from R64 On The xPrintServer
•
Updating to SGX5150 from older Wibox units
•
Upgrade an SLC-SLC8000 or SLB via HTTPS from a Windows PC
•
Upgrading Firmware with a TFTP Server
•
Using a Modem to dial into an EDS
•
Using arp and telnet to assign an IP address to a CoBos device server
•
Using both SLC ethernet ports on the same IP subnet
•
Using CPR Monitor
•
Using custom menus on SLCs running v5.4 or higher from the command line.
•
Using DeviceInstaller to upgrade Firmware and Web manager
•
Using Pack Control For UDS, SDS, xDirect, xPico, XPort & WiPort Products
•
Using Python on PremiereWave device servers
•
Using RFC2217 for remote control of most CoBos and Evolution device server serial ports
•
Using the CPR with Lantronix Device Servers and Fax modems
•
Using the modbus debug port for IAP model products with error exception codes
•
Using the Reset button on the xDirect to set it to factory defaults
•
Using the second serial port of the xPicoWiFi
•
Using the TFTPd server on a Windows PC
•
Using UDP Configuration In CoBos Products To Reply To The Last Host Requesting Data
•
V4.0.0.0 Firmware for the XPort-AR, EDS4100, EDS8, EDS16PR and EDS32PR
•
V6.0.0.1R2 for EDS4100, EDSx_PR and EDSxPS
•
vSLM Firmware Update Patch
•
vSLM Software Download
•
Web Configuration User Name & Password for UDS, WiBox, XPress-DR, SDS, XPort-03-04, WiPort, xDirect or other CoBos device server
•
Web page Does not display properly after upgrade
•
web2cob and other CoBos custom web page supporting files
•
What is a serial break?
•
Where can I get information on the Modbus protocol?
•
WiBox-E & WiPort-G Wireless LED Functionality
•
Windows XP and higher: TCP-IP LPR-LPD printing to EDS device servers and EPS, LPS and MPS "Traditional" print servers.
•
WiPort & WiBoxE WiFi output power
•
Wireless range of Lantronix 802.11 Wireless Devices
•
xPico - Resetting to factory defaults
•
xPico WiFi SMT Hazardous location info
•
xPico110 Firmware
•
XPort I-O Pins 1 and 8
•
XPORT PRO – State of Serial Output pin at Reset
•
XPort Shield Tabs
•
XPort-05 - The input spec of Pin3 Reset signal of XPort05R.
•
XPort-AR - Default username and password
•
xPrintServer - AirPrint and Bonjour over SonicWall hardware.
Show more below