Sending HTTP GET-commands from an embedded microcontroller or FPGA connected to a Cobos based Device Server like the Xport to a web server
How can I setup a Cobos Based product like a Xport to forward HTTP GET command from the microcontroller or FPGA?
To forward an HTTP GET command from the microcontroller or FPGA see the following procedure:
Forwarding http GET commands:
- Configure the XPort tunnel for accessing the remote device and send the HTTP GET command from the microcontroller or FPGA. All output from the HTTP server will be forwarded to the microcontroller.
Sending the HTTP GET and interpreting the answer must be done by the microcontroller. The Xport just acts as transparent tunnel
For achieving this the XPort may be configured as follows:
[Originally Published On: 06/11/2015 04:38 PM]