Lantronix Tech Support

All content
Space settings

How-to articles
How-to articles
This trigger is hidden

Results will update as you type.

•
Wireless range of Lantronix 802.11 Wireless Devices
•
xPico - Resetting to factory defaults
•
xPico WiFi SMT Hazardous location info
•
xPico110 Firmware
•
XPort I-O Pins 1 and 8
•
XPORT PRO – State of Serial Output pin at Reset
•
XPort Shield Tabs
•
XPort-05 - The input spec of Pin3 Reset signal of XPort05R.
•
XPort-AR - Default username and password
•
xPrintServer - AirPrint and Bonjour over SonicWall hardware.
•
xPrintServer - Configuring Default Printer Options
•
xPrintServer - Enabling multicast on Cisco Wireless Controllers
•
xPrintServer - Print Job Queuing and the Maximum Supported Number of Users and Printers
•
xPrintServer - Sharp MX-C300W prints artifacts (Bad resolution)
•
xPrintServer - Unable to print from an iOS device but xPS test print works - Communicating with printers through routers and Access Points
•
xPrintServer - Upgrading from 1.x or 2.x firmware to v3.x.0-x to resolve issues in iOS 7
•
XPrintServer – ‘No AirPrint Printers’ Found Message on iOS device when using a Verizon-Frontier FIOS Actiontec Router.
•
xPrintServer – A Workaround for Brother BR-Script3 Printers that Print slowly
•
xPrintServer – Losing Printers in the Printer List After Manually Adding New Printers
•
xPrintServer – Making Proper USB Connections to Powered USB hubs and Printers
•
xPrintServer boot loop after power cycle
•
xPrintServer Cloud Print Edition - Sharing a printer
•
XPrintServer Cloud Print Edition – When printing higher resolution print jobs the xPrintServer Cloud Print Edition reduces the resolution
•
xPrintServer Printer Discovery and Advertisement
•
xPrintServer-Home Edition - Printing from a Windows PC to a USB printer
•
xSenso Http Post and Ftp Put format definition
•
Drawing of ACDIN1001-01 DIN Rail Mounting Bracket for UDS1100, SDS1100 and EDS1100
•
Drawing of ACDIN2001-01 DIN Rail Mounting Bracket for UDS2100, SDS2101, WiBox and EDS2100
•
EDS4100 Dimensions
•
Evolution WiFi Device Servers - Configuring EAP-TLS for Microsoft IAS
•
Evolution WiFi Device Servers - Installing Microsoft IAS on Windows 2003 Enterprise Server
•
Installation of I-O module for SLC 8000 units, (or removal.)
•
PremiereWave EN firmware upgrade procedure for 7.2.0.0RC15 from a 7.0.0.0 firmware code.
•
Template for mounting EDSxPS Device Servers with M4 screws
•
UDS1100, EDS1100 and SDS1101 Dimensions
•
UDS2100, EDS2100 and SDS2101 Dimensions
•
Using DNS for Outbound Connections in the XPort-Pro
•
SLC -48Vdc Plug Connector Instructions
•
xPrintServer - Supported Printer List
•
Find My xPrintServer!
•
WiPort Dimensions - Assembly Drawing
•
Evolution WiFi Device Servers - 802.11i Configuration on Steel Belted Radius server
•
vSLM - Getting Started - Initial Device Discovery
•
Soldering and washing characteristics of Lantronix embedded device servers
•
Latest Firmware for Edge Management Gateway (EMG) 8500
•
Configuring CoBos For UDP Datagram Type 01
•
Initial IP address assignment on Evolution based products without using DeviceInstaller
•
Using Hostname for Outgoing Manual Connections in CoBOS Devices
•
The Amount and Method of Isolation Used in the UDS1100
•
CoBox & UDS - What TCP port #s should I use to connect to a serial port?
•
WiFi Radio Power Management in Lantronix CoBOS WiFi Devices
•
Unable to Print from my xPrintServer because print job is frozen in the iOS Print Spooler
•
CoBox Monitor mode commands and documentation for UDS, XPort-03-04, XPress-DR, WiBox and similar device servers
•
Duplicate or missing 0xFF bytes in the data stream on UDS, xDirect, xPico, XPort-0x, XPress-DR and similar device servers
•
The Difference between the ‘xxx’, ‘yyy’ and ‘zzz’ serial port login commands for CoBos products
•
SSH Tunneling on SCS100-200-400-1600-3200 #1
•
xPrintServer displays the blinking “Code 1” light when connected to a Cisco Ethernet switch
•
xPrintServer - Checking for new printer drivers
•
Xport-Pro Evolution: Using Modem Emulation Mode when using UDP Protocol
•
XPort-AR V2 to V3 Remote Upgrade Instructions
•
Windows Server 2003 will not install on a Dell server using Virtual Media
•
Windows 2000 and higher, TCP-IP socket printing
•
What is the maximum number of Modbus devices supported
•
Webpages Missing Left and Right Sides when Printing through xPrintServer
•
Web Pages Are Printing Incorrectly Through the xPrintServer
•
Username and password for web access - EPS2-100, LPS1-T & MPS100
•
The xPrintServer detects a printer during the Auto-Discovery process but does not automatically provision the printer.
•
Testing for xPrintServer Bonjour Printer Advertisement
•
SLC displays DHCP errors when receiving an IP address from a Sun server
•
Setting Up Sequential or Simultaneous Serial Tunnel for an EDS1100210
•
Services Explained
•
Sending Break through CoBos based device server's port to an attached device
•
Resetting an EDS4100 to Factory Defaults
•
Latest firmware for the XPort-Direct
•
Latest firmware for the xPico
•
Latest firmware for the MatchPort-NR
•
Printing from xPrintServer to shared Windows printer on Server 2003 and 2008
•
Micro (CO-E2-11AAR)
•
Telnet Connection from a Script
•
AutoTCP setup for M110
•
E220 Power Consumption
•
mPack Command List
•
SSH access (Router E-Series)
•
Integration of Technoton BLE sensors with the FOX3-3G-BLE makes fuel monitoring easier
•
SnapCap guide for M110 and E210 series
•
Add RADIUS support to E220 router
•
Log router status to a Google Spreadsheet via IFTTT
•
ACC-CA01 pinout
•
How to update mPack
•
PPP Dial-up on M114
•
Cell Location on M110 series
•
How to configure Load Balancing
•
E210 - How to use serial port RS-232
•
Cell Location package
•
How to use Reporting Agent
•
Copy files with SCP
•
Calibration of analog inputs on the tracking devices FOX3 or BOLERO40 series
•
FOX3 or BOLERO40 sends SMS to the smartphone with a "google maps" link.
•
CANbus option on the FOX3 series
•
Flashing a new firmware version on the tracking devices FOX3 and BOLERO40 series via a terminal SW
•
Connect the router E2xx series to D2Sphere
•
Connecting the Ignition (IGN) line on the FOX3 or BOLERO40 series to the vehicle IGN
•
Premium-Features on the FOX3 and BOLERO40 series
•
Activation a Premium-Feature on a FOX3 or BOLERO40
•
Using the internal motion sensor (gyro sensor) in the FOX3 and BOLERO40 series for Trip-Start/-Stop detection.
•
Loging into E210 and E220 routers
•
Finding information about Lantronix products
•
Accessing Monitor Mode using telnet - (Cobox, UDS-10, UDS100_200, UDS1100_2100, XPort, WiPort, WiBox, xPico)
•
Latest Firmware for the XPress DR (New version XSDRSN-03)
•
SLC8000 - configuring and testing IP Filter Rulesets
•
Technical Support for the xPrintServer
•
Spider, reset the unit to factory settings
•
Creating Open SSH RSA or DSA Keys
•
Using Multicast with xPrintServer and UBox USB Device Servers
•
Update the tracker device (FOX3 or BOLERO40) over the air (Remote Update) via the workbench
•
WLAN dongle for the FOX3 series
•
FOX3-3G-BLE with built-in Bluetooth Low Energy
•
Creating custom web pages in CoBos and Evolution
•
Serial Tunnel using Modem Emulation between two CoBos device servers
•
Firmware for the xDirect
•
Latest Firmware for the UDS1100
•
Latest Firmware for the SGX5150
•
Ripple20 vulnerability
•
Default Username and default Password not working for devices
•
Are any of the Lantronix products affected by AMNESIA:33 vulnerability?
•
Serial Tunnel configuration between EDS - EDS
•
Serial Tunnel configuration between UDS - UDS
•
Latest Firmware for the EDS 3000 PR series
•
Latest Firmware for the EDS 3000 PS series
•
Latest Firmware for Edge Management Gateway (EMG) 7500
•
Latest Firmware for the XPress DR-IAP (New version XSDRIN-03)
•
Upgrading xPrintServer Cloud firmware
•
Latest SDK for Evolution based XPort Pro and Matchport AR devices
•
Latest SDK for uCLinux based XPort Pro, Matchport AR, EDS1100, EDS2100 and EDS2100-2 devices
•
Latest SDK for Midas based XPort Edge, xPico 240, xPico 250 and xPico 270, and xPico WiFi devices
•
Latest SDK for Yocto based Linux Gateway devices PremierWave 2050 and SGX 5150
•
UDS1100, Xport, xDirect web pages shows "Undefined"
•
APACHE LOG4J Vulnerability
•
Latest firmware for the LIB-4424 Series
•
Latest firmware for the SISGM 1040-284-LRT
•
Latest firmware for the SISPM 1040-362-LRT
•
Latest firmware for the SISPM1040-582-LRT.
•
Latest firmware for the SISPM 1040-384-LRT-C
•
Latest firmware for the SISPM1040-3166-L
•
Latest firmware for the SISPM1040-3248-L
•
Latest firmware for the SISTM1040-262D-LRT-B
•
Latest firmware for the SM4T4DPA
•
Latest firmware for the SM8TAT2SA-DC
•
Latest firmware for the SM12DP2XA
•
Latest firmware for the SM16TAT2SA
•
Latest firmware for the SM24DP4XA
•
Latest firmware for the SM24DPB
•
Latest firmware for the SM24T6DPA
•
Latest firmware for the SM24TAT2SA
•
Latest firmware for the SM24TAT4XB
•
Latest firmware for the SM24TBT2DPA
•
Latest firmware for the SM48TAT4XA-RP
•
Latest firmware for the EO2PSE4052-111 & EO2PD4052-111
•
Latest firmware for the C2110 Series
•
Latest firmware for the C2210 Series
•
Latest firmware for the C2220 Series

Lantronix Tech Support

/

Public

/

E220 Power Consumption

Owned by Jane

Last updated: Mar 29, 2020 by Saleh Mohamad

1 min read