Lantronix Tech Support

All content
Space settings

How-to articles
How-to articles
This trigger is hidden

Results will update as you type.

•
Syslog facilities on SLCs
•
TCP connection from a Windows Server takes about 9 seconds to establish - ECN
•
TCP Keepalives explained
•
Technical Application Notes Page on Lantronix.com
•
Testing the serial port on a UDS, SDS, WiBox or xDirect with an RS232 loopback jumper
•
Throughput For XPort with Encryption and Without Encryption
•
Trouble Shooting Lantronix Legacy and Discontinued Print Servers, EPS, MPS, LPS (NOT xPrintServer)
•
Troubleshooting RS485 Connections
•
TTL to RS232 Interface for CoBox Micro and Mini
•
Twisted Pair Ethernet Cable Color Coding
•
Types Of Antennas For Lantronix Wireless products
•
UDS10 - RS485-RS422 pinout
•
UL Certifications
•
Unable to browse to end device interface from SLM interface
•
Unable to Update Firmware from R64 On The xPrintServer
•
Updating to SGX5150 from older Wibox units
•
Upgrade an SLC-SLC8000 or SLB via HTTPS from a Windows PC
•
Upgrading Firmware with a TFTP Server
•
Using a Modem to dial into an EDS
•
Using arp and telnet to assign an IP address to a CoBos device server
•
Using both SLC ethernet ports on the same IP subnet
•
Using CPR Monitor
•
Using custom menus on SLCs running v5.4 or higher from the command line.
•
Using DeviceInstaller to upgrade Firmware and Web manager
•
Using Pack Control For UDS, SDS, xDirect, xPico, XPort & WiPort Products
•
Using Python on PremiereWave device servers
•
Using RFC2217 for remote control of most CoBos and Evolution device server serial ports
•
Using the CPR with Lantronix Device Servers and Fax modems
•
Using the modbus debug port for IAP model products with error exception codes
•
Using the Reset button on the xDirect to set it to factory defaults
•
Using the second serial port of the xPicoWiFi
•
Using the TFTPd server on a Windows PC
•
Using UDP Configuration In CoBos Products To Reply To The Last Host Requesting Data
•
V4.0.0.0 Firmware for the XPort-AR, EDS4100, EDS8, EDS16PR and EDS32PR
•
V6.0.0.1R2 for EDS4100, EDSx_PR and EDSxPS
•
vSLM Firmware Update Patch
•
vSLM Software Download
•
Web Configuration User Name & Password for UDS, WiBox, XPress-DR, SDS, XPort-03-04, WiPort, xDirect or other CoBos device server
•
Web page Does not display properly after upgrade
•
web2cob and other CoBos custom web page supporting files
•
What is a serial break?
•
Where can I get information on the Modbus protocol?
•
WiBox-E & WiPort-G Wireless LED Functionality
•
Windows XP and higher: TCP-IP LPR-LPD printing to EDS device servers and EPS, LPS and MPS "Traditional" print servers.
•
WiPort & WiBoxE WiFi output power
•
Wireless range of Lantronix 802.11 Wireless Devices
•
xPico - Resetting to factory defaults
•
xPico WiFi SMT Hazardous location info
•
xPico110 Firmware
•
XPort I-O Pins 1 and 8
•
XPORT PRO – State of Serial Output pin at Reset
•
XPort Shield Tabs
•
XPort-05 - The input spec of Pin3 Reset signal of XPort05R.
•
XPort-AR - Default username and password
•
xPrintServer - AirPrint and Bonjour over SonicWall hardware.
•
xPrintServer - Configuring Default Printer Options
•
xPrintServer - Enabling multicast on Cisco Wireless Controllers
•
xPrintServer - Print Job Queuing and the Maximum Supported Number of Users and Printers
•
xPrintServer - Sharp MX-C300W prints artifacts (Bad resolution)
•
xPrintServer - Unable to print from an iOS device but xPS test print works - Communicating with printers through routers and Access Points
•
xPrintServer - Upgrading from 1.x or 2.x firmware to v3.x.0-x to resolve issues in iOS 7
•
XPrintServer – ‘No AirPrint Printers’ Found Message on iOS device when using a Verizon-Frontier FIOS Actiontec Router.
•
xPrintServer – A Workaround for Brother BR-Script3 Printers that Print slowly
•
xPrintServer – Losing Printers in the Printer List After Manually Adding New Printers
•
xPrintServer – Making Proper USB Connections to Powered USB hubs and Printers
•
xPrintServer boot loop after power cycle
•
xPrintServer Cloud Print Edition - Sharing a printer
•
XPrintServer Cloud Print Edition – When printing higher resolution print jobs the xPrintServer Cloud Print Edition reduces the resolution
•
xPrintServer Printer Discovery and Advertisement
•
xPrintServer-Home Edition - Printing from a Windows PC to a USB printer
•
xSenso Http Post and Ftp Put format definition
•
Drawing of ACDIN1001-01 DIN Rail Mounting Bracket for UDS1100, SDS1100 and EDS1100
•
Drawing of ACDIN2001-01 DIN Rail Mounting Bracket for UDS2100, SDS2101, WiBox and EDS2100
•
EDS4100 Dimensions
•
Evolution WiFi Device Servers - Configuring EAP-TLS for Microsoft IAS
•
Evolution WiFi Device Servers - Installing Microsoft IAS on Windows 2003 Enterprise Server
•
Installation of I-O module for SLC 8000 units, (or removal.)
•
PremiereWave EN firmware upgrade procedure for 7.2.0.0RC15 from a 7.0.0.0 firmware code.
•
Template for mounting EDSxPS Device Servers with M4 screws
•
UDS1100, EDS1100 and SDS1101 Dimensions
•
UDS2100, EDS2100 and SDS2101 Dimensions
•
Using DNS for Outbound Connections in the XPort-Pro
•
SLC -48Vdc Plug Connector Instructions
•
xPrintServer - Supported Printer List
•
Find My xPrintServer!
•
WiPort Dimensions - Assembly Drawing
•
Evolution WiFi Device Servers - 802.11i Configuration on Steel Belted Radius server
•
vSLM - Getting Started - Initial Device Discovery
•
Soldering and washing characteristics of Lantronix embedded device servers
•
Latest Firmware for Edge Management Gateway (EMG) 8500
•
Configuring CoBos For UDP Datagram Type 01
•
Initial IP address assignment on Evolution based products without using DeviceInstaller
•
Using Hostname for Outgoing Manual Connections in CoBOS Devices
•
The Amount and Method of Isolation Used in the UDS1100
•
CoBox & UDS - What TCP port #s should I use to connect to a serial port?
•
WiFi Radio Power Management in Lantronix CoBOS WiFi Devices
•
Unable to Print from my xPrintServer because print job is frozen in the iOS Print Spooler
•
CoBox Monitor mode commands and documentation for UDS, XPort-03-04, XPress-DR, WiBox and similar device servers
•
Duplicate or missing 0xFF bytes in the data stream on UDS, xDirect, xPico, XPort-0x, XPress-DR and similar device servers
•
The Difference between the ‘xxx’, ‘yyy’ and ‘zzz’ serial port login commands for CoBos products
•
SSH Tunneling on SCS100-200-400-1600-3200 #1
•
xPrintServer displays the blinking “Code 1” light when connected to a Cisco Ethernet switch
•
xPrintServer - Checking for new printer drivers
•
Xport-Pro Evolution: Using Modem Emulation Mode when using UDP Protocol
•
XPort-AR V2 to V3 Remote Upgrade Instructions
•
Windows Server 2003 will not install on a Dell server using Virtual Media
•
Windows 2000 and higher, TCP-IP socket printing
•
What is the maximum number of Modbus devices supported
•
Webpages Missing Left and Right Sides when Printing through xPrintServer
•
Web Pages Are Printing Incorrectly Through the xPrintServer
•
Username and password for web access - EPS2-100, LPS1-T & MPS100
•
The xPrintServer detects a printer during the Auto-Discovery process but does not automatically provision the printer.
•
Testing for xPrintServer Bonjour Printer Advertisement
•
SLC displays DHCP errors when receiving an IP address from a Sun server
•
Setting Up Sequential or Simultaneous Serial Tunnel for an EDS1100210
•
Services Explained
•
Sending Break through CoBos based device server's port to an attached device
•
Resetting an EDS4100 to Factory Defaults
•
Latest firmware for the XPort-Direct
•
Latest firmware for the xPico
•
Latest firmware for the MatchPort-NR
•
Printing from xPrintServer to shared Windows printer on Server 2003 and 2008
•
Micro (CO-E2-11AAR)
•
Telnet Connection from a Script
•
AutoTCP setup for M110
•
E220 Power Consumption
•
mPack Command List
•
SSH access (Router E-Series)
•
Integration of Technoton BLE sensors with the FOX3-3G-BLE makes fuel monitoring easier
•
SnapCap guide for M110 and E210 series
•
Add RADIUS support to E220 router
•
Log router status to a Google Spreadsheet via IFTTT
•
ACC-CA01 pinout
•
How to update mPack
•
PPP Dial-up on M114
•
Cell Location on M110 series
•
How to configure Load Balancing
•
E210 - How to use serial port RS-232
•
Cell Location package
•
How to use Reporting Agent
•
Copy files with SCP
•
Calibration of analog inputs on the tracking devices FOX3 or BOLERO40 series
•
FOX3 or BOLERO40 sends SMS to the smartphone with a "google maps" link.
•
CANbus option on the FOX3 series
•
Flashing a new firmware version on the tracking devices FOX3 and BOLERO40 series via a terminal SW
•
Connect the router E2xx series to D2Sphere
•
Connecting the Ignition (IGN) line on the FOX3 or BOLERO40 series to the vehicle IGN
•
Premium-Features on the FOX3 and BOLERO40 series
•
Activation a Premium-Feature on a FOX3 or BOLERO40
•
Using the internal motion sensor (gyro sensor) in the FOX3 and BOLERO40 series for Trip-Start/-Stop detection.
•
Loging into E210 and E220 routers
•
Finding information about Lantronix products
•
Accessing Monitor Mode using telnet - (Cobox, UDS-10, UDS100_200, UDS1100_2100, XPort, WiPort, WiBox, xPico)
•
Latest Firmware for the XPress DR (New version XSDRSN-03)
•
SLC8000 - configuring and testing IP Filter Rulesets
•
Technical Support for the xPrintServer
•
Spider, reset the unit to factory settings
•
Creating Open SSH RSA or DSA Keys
•
Using Multicast with xPrintServer and UBox USB Device Servers
•
Update the tracker device (FOX3 or BOLERO40) over the air (Remote Update) via the workbench
•
WLAN dongle for the FOX3 series

Lantronix Tech Support

/

/

UDS2100, EDS2100 and SDS2101 Dimensions

UDS2100, EDS2100 and SDS2101 Dimensions

Owned by Jane

Last updated: Feb 26, 2020

1 min read

Loading data...

Original Date Created: 02/10/2011 04:01 PM

Report a new issue

{"serverDuration": 32, "requestCorrelationId": "5753884825534a61ae04d8e845cf69d7"}