What is the difference between the XPort and the XPort Pro of the state of the serial output pin at the time of reset?

Pin 4 on XPort Pro and xPort Pr LX6 will, when pulling RESETIN# to ground, fade to 10% of VDD withing 750us. The ouput is left floating during this mesurement.

After releasing the RESETIN# on Pin 3, pin4 will after roughly 950ms jump to VDD.

This is different from the behavior of XPort-03R/04R/5R.

Pin 4 on the xPort stays high no matter what the status of RESETIN# is.

Therefore, if you replace an XPort-03R/04R/5R with an XPort Pro it is necessary to note this different behavior on reset.

[Originally Published On: 02/05/2010 04:53 PM]