/
Factory Reset of an SLC or SLB
Factory Reset of an SLC or SLB
How can I factory reset an SLC or SLB?
From the front panel:
- Press the right arrow until you see the firmware version
- Press the down arrow once
- You will be asked to enter a password. Press the center button (enter).
- Use the up and down arrows to change the digit, and left and right arrow to move between the numbers.
- When the code is entered, press the enter button again.
The default code is 999999.
[Originally Published On: 04/25/2006 03:14 PM]
, multiple selections available,
Related content
Loading firmware onto an SLC-SLB-SLC8000
Loading firmware onto an SLC-SLB-SLC8000
More like this
Latest Firmware for SLC 8000 Series
Latest Firmware for SLC 8000 Series
Read with this
SLCxx-SLB884 Password Recovery when front panel is disabled or front panel password is unknown
SLCxx-SLB884 Password Recovery when front panel is disabled or front panel password is unknown
More like this
Loading SLC or SLB firmware from the USB connector on the front panel
Loading SLC or SLB firmware from the USB connector on the front panel
More like this
SLC Model Number changes after firmware upgrade
SLC Model Number changes after firmware upgrade
More like this
Reset a Spider to factory defaults using the serial console port and the Reset button
Reset a Spider to factory defaults using the serial console port and the Reset button
More like this