...
Because the files are larger the destination file codes have been changed for the three XPort products: from X1 to X4 for XPort-01; from X2 to X5 for XPort-03; and from X3 to X5 for XPort-485.
...
Upgrading to 6.x from 1.8
Network Upgrade
The pre-6.x firmware is not able to load a firmware image larger than 64 KB, so it must be loaded in a two-step process.
...
Example command for firmware upgrade from a DOS command prompt type:
- C:\ tftp -i <ip address> put xpt03upg_v21a.rom X2
- Wait 20 seconds
- C:\ tftp -i <ip address> put xpt03_6503.rom X5
Example command for the new Web Manager upgrade from a DOS command prompt type:
...
Example command for firmware upgrade from a DOS command prompt type:
- C:\ tftp -i <ip address> put xp485upg.rom X3
- Wait 20 seconds
- C:\ tftp -i <ip address> put xpt03_6102.rom X5
Example command for the new Web Manager upgrade from a DOS command prompt type:
...
The XPort should be operational with new firmware.
...
Serial Upgrade
Use the Advanced Recovery feature of DeviceInstaller 4.0.0.x and later as instructed in the XPort User Guide, available from http://www.lantronix.com/support/documentation.html#embds.
...
Upgrading from 6.1.0.2 and later
To reflect the change between pre-6.1.0.2 firmware and 6.1.0.2 or higher firmware, the TFTP destination files have been changed for XPort, XPort-03, and XPort485 from X1 to X4, X2 to X5, and X3 to X5, respectively.
...