The text based Setup Mode of my device server requires a hex number for the Interface Mode. What are the valid hex values for Interface Mode? The User Guide only shows which bits to set with a few examples. Is there an easier way?
Here is a table of Valid Interface Modes.
Do not use Hex mode values not listed in this table
| HEX | Stop Bit | Parity | Char Bit | RS Type |
| 48 | 1 | None | 7 | 232 |
| 49 | 1 | None | 7 | 422/485 |
| 4B | 1 | None | 7 | 485 2-wire |
| 4C | 1 | None | 8 | 232 |
| 4D | 1 | None | 8 | 422/485 |
| 4F | 1 | None | 8 | 485 2-wire |
| 58 | 1 | Odd | 7 | 232 |
| 59 | 1 | Odd | 7 | 422/485 |
| 5B | 1 | Odd | 7 | 485 2-wire |
| 5C | 1 | Odd | 8 | 232 |
| 5D | 1 | Odd | 8 | 422/485 |
| 5F | 1 | Odd | 8 | 485 2-wire |
| 78 | 1 | Even | 7 | 232 |
| 79 | 1 | Even | 7 | 422/485 |
| 7B | 1 | Even | 7 | 485 2-wire |
| 7C | 1 | Even | 8 | 232 |
| 7D | 1 | Even | 8 | 422/485 |
| 7F | 1 | Even | 8 | 485 2-wire |
| C8 | 2 | None | 7 | 232 |
| C9 | 2 | None | 7 | 422/485 |
| CB | 2 | None | 7 | 485 2-wire |
| CC | 2 | None | 8 | 232 |
| CD | 2 | None | 8 | 422/485 |
| CF | 2 | None | 8 | 485 2-wire |
| D8 | 2 | Odd | 7 | 232 |
| D9 | 2 | Odd | 7 | 422/485 |
| DB | 2 | Odd | 7 | 485 2-wire |
| DC | 2 | Odd | 8 | 232 |
| DD | 2 | Odd | 8 | 422/485 |
| DF | 2 | Odd | 8 | 485 2-wire |
| F8 | 2 | Even | 7 | 232 |
| F9 | 2 | Even | 7 | 422/485 |
| FB | 2 | Even | 7 | 485 2-wire |
| FC | 2 | Even | 8 | 232 |
| FD | 2 | Even | 8 | 422/485 |
| FF | 2 | Even | 8 | 485 2-wire |
[Originally Published On: 08/04/2006 04:19 PM]