By default, the username is admin for all xDirect and xDirect-IAP devices. The default password will depend on when the device was manufactured.

For devices manufactured before 1 Jan 2020, and the default password is PASS

For devices manufactured on or after 1 Jan 2020, each device will have a unique default password and it is last 8 characters of the Device ID. Device ID is not same as the MAC address or Serial number of the device. The Device ID is included in the QR code on the label in the device (not the box). You may use any QR code data reader application in a smart phone to read the data. For example the data read from QR code in an XDirect will look like the following string :

(V1)1(C1)7(P1)XDT2321002-01(R1)C12(D1)20W13(L1)THAILAND 02(S1)xxxxxxxxxxxx(S2)xxxxxxxxxxxxxxxxxxxxxxxxXXXXXXXX(M1)xxxxxxxxxxxx(E1).

In the above example, the 32 digits after the marker “(S2)” is the Device ID of the device (shown as 32 x). The last 8 digits are the default password to the device.

Example: When you scan the below QR-Code using QR-Code reader app., the read code is:
(V1)1(C1)7(P1)XDT2321002-01(R1)D12(D1)21W29(L1)THAILAND 02(S1)0080A3F3E93A(S2)00204ADWSOVGVYZ62WMSQOF276O3UQSD(M1)0080A3F3E93A(E1)

The password for this particular XDirect is 76O3UQSD and its username is admin

Open