Accessing Monitor Mode using telnet - (Cobox, UDS-10, UDS100_200, UDS1100_2100, XPort, WiPort, WiBox, xPico)
How can I get to the Monitor mode on a Cobox, UDS, XPort or WiPort from a telnet session?
If the device is running v3.40 or higher software you can type a capital "M" at the "Press Enter to go into Setup Mode" prompt you get when you telnet to port 9999. This will put you into monitor mode. This is equivalent to typing "XX1" on a terminal attached to the serial port while the Cobox is booting on devices that have serial port access only.
[Originally Published On: 06/28/1999 10:48 AM]