Micro (CO-E2-11AAR)
Micro (CO-E2-11AAR)
Interface: ltxfaq
Staff
----------------------------------------
Hi Michael,
We're checking on this. We'll keep you posted.
Regards,
Gary Fisher
LANTRONIX
Senior Technical Support Engineer
Lantronix Technical Support
15353 Barranca Parkway
Irvine, CA 92618
http://ltxfaq.custhelp.com/cgi-bin/ltxfaq.cfg/php/enduser/ask.php
Phone: (800) 422-7044 or (949) 453-3990
Get real-time help online! Try Live Assist at http://www.lantronix.com/support/live-assist.html
Register your product online at http://www.lantronix.com/prodreg
Need cables for use with Lantronix products? Go to http://www.lantronix.com/paal
Note
----------------------------------------
From: gary@lantronix.com [mailto:gary@lantronix.com]
Sent: Friday, June 22, 2007 12:17 PM
To: Martin Maglione; Daryl Miller
Subject: FWD: Micro (CO-E2-11AAR)
The following incident has been forwarded to you by:
Gary Fisher (gary@lantronix.com)
Sender's Comment
Hi,
Does anyone know what the tolerances for the dimensions on page 9 of the Integration Guide at http://www.lantronix.com/pdf/EIK_IG.pdf are?
Please let me know if there's another drawing somewhere showing tolerances so I can pass it on to this customer.
Customer
----------------------------------------
The guide provides the dimensions, but I can't find the toleances for them. Where in the integration guide that you referenced, or elsewhere, are the dimensional _tolerances_?
Staff
----------------------------------------
Hi Michael,
The layout and dimensions of the Micro are documented starting on page 9 of the Integration Guide at http://www.lantronix.com/pdf/EIK_IG.pdf.
Regards,
Gary Fisher
LANTRONIX
Senior Technical Support Engineer
Lantronix Technical Support
15353 Barranca Parkway
Irvine, CA 92618
http://ltxfaq.custhelp.com/cgi-bin/ltxfaq.cfg/php/enduser/ask.php
Phone: (800) 422-7044 or (949) 453-3990
Get real-time help online! Try Live Assist at http://www.lantronix.com/support/live-assist.html
Register your product online at http://www.lantronix.com/prodreg
Need cables for use with Lantronix products? Go to http://www.lantronix.com/paal
Rules_response
----------------------------------------
Title: How do I assign an IP Address to an XPort?
Link: http://ltxfaq.custhelp.com/cgi-bin/ltxfaq.cfg/php/enduser/popup_adp.php?p_faqid=1266&p_created=1154368640
Title: Creating custom web pages
Link: http://ltxfaq.custhelp.com/cgi-bin/ltxfaq.cfg/php/enduser/popup_adp.php?p_faqid=943&p_created=1075227796
Title: PCN's for Embedded Device Servers - Board Level - Micro, WiMicro, UDS100-B, etc.
Link: http://ltxfaq.custhelp.com/cgi-bin/ltxfaq.cfg/php/enduser/popup_adp.php?p_faqid=1332&p_created=1170870204
Title: Web interface on UDS/Cobox/XPort/XPress device does not load
Link: http://ltxfaq.custhelp.com/cgi-bin/ltxfaq.cfg/php/enduser/popup_adp.php?p_faqid=1009&p_created=1098987004
Title: Description of Serial Characteristics
Link: http://ltxfaq.custhelp.com/cgi-bin/ltxfaq.cfg/php/enduser/popup_adp.php?p_faqid=731&p_created=1025385841
Customer
----------------------------------------
What are the location and hole size tolerances for the mounting holes on the mirco board dimensional layout.
Uncommitted Response
----------------------------------------
Hi $contacts.first_name,
The tolerance on all measurments in the diagrams on page 9 of http://www.lantronix.com/pdf/EIK_IG.pdf is .005".
Regards,
Gary Fisher
LANTRONIX
Senior Technical Support Engineer
Lantronix Technical Support
15353 Barranca Parkway
Irvine, CA 92618
http://ltxfaq.custhelp.com/cgi-bin/ltxfaq.cfg/php/enduser/ask.php
Phone: (800) 422-7044 or (949) 453-3990
Get real-time help online! Try Live Assist at http://www.lantronix.com/support/live-assist.html
Register your product online at http://www.lantronix.com/prodreg
Need cables for use with Lantronix products? Go to http://www.lantronix.com/paal
[Originally Published On: 06/22/2007 06:27 PM]