Latest firmware for ETS8PS, ETS8P, ETS16PS & ETS16P Multiport Device Server

What is the latest firmware version for ETS8PS, ETS8P, ETS16PS and ETS16P Multiport Device Servers?


Version V3.6/4
July 12, 2000
Copyright 2000, Lantronix

Release Summary
===============
These release notes will document new features added and problems corrected since the V3.6/3 software release.

New Features
============
Telnet support has been modified to convert a <CR><LF> in the network data stream into a single <CR> when transmitted out a serial port.  This should allow telnet implementations that send <CR><LF> when the user presses just <CR> to work correctly when connected to remote device console ports.

Resolved Problems
=================
These problems have been corrected since the V3.6/3 software release.

When authenticating into a Netware V5 NDS tree, under certain conditions memory could be corrupted during the authentication phase and units would crash.

If DHCP was enabled on a unit previously configured with an IP address/subnet mask pair, and the unit failed to receive a DHCP response, the subnet mask was incorrectly restored to the natural (class A, class B or class C) default subnet mask.

When issuing a DHCP request, do not ask for any specific time on the lease, as some DHCP server implementations will blindly respond with with the lease time requested rather than the lease time specified in configuration files.

=================================================

DOWNLOAD FULL RELEASE NOTES via FTP

DOWNLOAD ETS8P FIRMWARE V3.6/4 BINARY via FTP

DOWNLOAD ETS16P FIRMWARE V3.6/4 BINARY via FTP


Having problems connecting to the FTP server?
To download the firmware and/or release notes via HTTP, click the attachments below.

The ETSP.SYS file is the same for the ETS8PS, ETS8P, ETS16PS and the ETS16P.


File Attachments :



[Originally Published On: 09/02/1999 02:24 PM]