Cannot Reboot to Standalone Firmware Installer Using eth0 Auto IP “Reboot to Standalone Firmware Installer” web page fails to redirect

Owned by Jane
Feb 10, 2020
1 min read

Why does "Reboot to Standalone Firmware Installer" for firmware updates web page fails to redirect?

Problem: Both eth0 and wlan0 of SGX5150/PW2050 have Auto IP addresses. In Web Browser, visit SGX5150/PW2050 using the eth0 Auto IP. Go to the "Administration" web page, and click the button "Reboot to Standalone Firmware Installer". The web page fails to redirect.


Reason: Although both in Auto IP, the two interfaces (eth0 and wlan0) belong to two separate Auto IP networks that have no inter-connection to each other.


Solution: Disable WLAN Profiles before rebooting to Standalone Firmware Installer.


[Originally Published On: 11/06/2017 08:42 AM]

Report a new issue