What is the latest version of DeviceInstaller?


The current version of DeviceInstaller is 4.4.0.7. Click on the FTP or HTTP link in the table below to download the Setup application and Release Notes.

Product Comment
Web Setup application for Windows (1.3 MB) - ZIP Archive Requires internet access to install
Release Notes

(Requirements see below)

If you need a stand-alone DeviceInstaller setup application for a host with no internet access, you can download it here:

Product Comment
Stand-alone DeviceInstaller Setup application for Windows (125 MB) - ZIP Archive No internet access required to install

(Requirements see below)

To access DeviceInstaller Help, click here. Or, run DeviceInstaller and hit F1 on your keyboard.

If you need the latest DeviceInstaller Product Information Base file, you can download it here:

Product Comment
Current Lantronix.pibx file Right-click and choose "Save Target As..."

Command Line Utilities:

These command line utilities can be used to troubleshoot DeviceInstaller (DI) issues. Type the command with no arguments for a Usage message. These are stand-alone utilities, no installation is required:

Utility Comment
dsearch Searches for Lantronix device servers on the local network using DI search broadcasts
dping "pings" Lantronix device servers on the local network using DI search protocol
dlisten Listens for DI search broadcasts on the local network


Device Installer does not include firmware

To download firmware for your Lantronix product, Click Here.

Requirements
============
    The following items are required to run DeviceInstaller:

    1.  Windows x86 7, 8/8.1, 10
        Windows x64 7, 8/8.1, 10, Server 2008, and Server 2012
    2.  Microsoft .NET Framework v4.0.
    3.  Microsoft Internet Explorer 5.1, or later.
    4.  30MB free hard drive space.
    
    The "Internet Connection Firewall" must be disabled, or else 
    UDP Port 30718 must be available.  Otherwise, you will not be 
    able to detect or communicate with any devices on the network.
    To configure, go to the Control Panel, go to Network Settings, 
    select the corresponding network adapter, choose Properties, and
    go to the Advanced tab.

To configure, go to the Control Panel, go to Network Settings, select the corresponding network adapter, choose Properties, and go to the Advanced tab.

For most current Lantronix device servers, only port 30718 must be added as an Exception. If you are using the DeviceInstaller with legacy device servers such as the MSSs, add exceptions for 43282 and 43283.

If the connection is between two different sites you may also need to allow these ports access through the corporate firewall. As Device installer only detects units on the local subnet.

If you would like to be notified when a new version of the Device Installer is available, click the button below labeled "Notify Me".



[Originally Published On: 01/22/2002 12:59 PM]