...
Note: If you are upgrading from v3.x or earlier to v4.x or later click here for for the correct procedure.
Here is the method for using Windows command line ftp to upload firmware and web pages into an Evolution product.
1. Open a command Prompt. E.g. choose Run from the Start menu, type cmd and press Enter.
2. Change to the directory that contains the firmware files for your Evolution product
3. Type ftp –i xxx.xxx.xxx.xxx, where xxx.xxx.xxx.xxx is the IP address of the Evolution product.
4. When prompted for user, type admin
5. When prompted for password, type PASS
6. At the ftp> prompt type bin
...
** Wait few minutes for the unit to uncompress and install the new firmware and reboot. If the device server is running 4.x or higher this completes the installation.
...
** The steps below are for v3.x firmware and below only!:
9. At the command prompt change directories to www (webpage files of the firmware )
...