Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

After reading all of the above, if the determination is that your SLC or SLB meets both the 512MB CF and boot code 1.1.5L10 prerequisites AND is in a state that upgrading via the patch is not possible and a firmware recovery using an image copy is necessary, you can proceed with downloading the image file, which can be found here:

SLC-03/SLB884 v6.1.0.0 image

SLB882 v6.3.0.0 image

SLC-03/SLB884 v6.3.0.0 imageSLB882 v6.5.0.0 image


The SLB runs the same firmware, so the SLC image file can be used on either model.  Once you have the image file, you can use the procedure shown in this FAQ to load it.

...