...
- The following items are required to run CPR:
- x86 (32bit): Windows XP, 2003 Server, Vista, 7, 8, and 2008 Server
- x64 (64bit): Windows Vista, 7, 8, and 2008 Server
- Microsoft .NET Framework v4.0 (For CprManager.exe and CprMonitor.exe only)
- 30MB free hard drive space.
- Device Servers must have firmware version 6.5.0.6 or greater to use RFC2217 (TruPort) capability.
...
To install the CPR on Windows 8. 8.1, or 2008 Server SP2 x64 you must use the CPR_x64DL_4.3.0.3.msi file. The standard setup.exe file will fail in Windows 8, 8.1, and 2008 Server SP2 x64. The CPR_x64DL_4.3.0.3.msi file is available from:
Firewall
The "Internet Connection Firewall" must be disabled, or else UDP Ports 30718, 43282, 43283 must be available. Otherwise, you will not be able to detect or communicate with any devices on the network.
...
Click one of the links below to download the full Windows GUI and command line versions of the CPR:
File | Comment |
|---|---|
| CPR Setup application for Windows GUI (1.3 MB) - zip archive | Requires Internet access to install |
| CPR Setup application for Windows Command Line (1.3 MB) - zip archive | Requires Internet access to install |
| CPR Release Notes | Right-click and choose "Save Target As..." |
...
If you need a stand-alone CPR setup application for a host with no internet access, you can download it from here:
File |
|---|
| Stand-alone CPR Setup application for Windows (60 MB) - zip archive |
Redirector 3.1.0.4
If you need to control hardware handshaking lines directly on an MSS, ETS or SCSx00 product, the original Redirector is still available at the links below. These products use a proprietary protocol to control HW handshaking signals instead of TruPort Technology (RFC2217). Click one of the links below to download the v3.1.0.4 Redirector:
File | Comment |
|---|---|
| Redirector - zip archive | Obsolete - Use at your own risk |
| Release Notes | Right-click and choose "Save Target As..." |
...