...
The resulting .cpc file can be loaded onto the new installation of the CPR by choosing Import from Com Port Config file from the Com Port menu and navigating to the file.
A version that will allow clean upgrade without requiring uninstallation of previously installed versions will be available in a future release. To be notified when new versions of the CPR are released, click on the "Notify Me" button near the bottom of this page.
Requirements
- The following items are required to run CPR:
- x86 (32bit): Windows XP, 2003 Server, Vista, 7, 8, and 2008 Server
- x64 (64bit): Windows Vista, 7, 8, and 2008 Server
- Microsoft .NET Framework v4.0 (For CprManager.exe and CprMonitor.exe only)
- 30MB free hard drive space.
- Device Servers must have firmware version 6.5.0.6 or greater to use RFC2217 (TruPort) capability.
...
Click one of the links below to download the full Windows GUI and command line versions of the CPR:
File | Comment |
|---|---|
| CPR Setup application for Windows GUI (1.3 MB) - zip archive | Requires Internet access to install |
| CPR Setup application for Windows Command Line (1.3 MB) - zip archive | Requires Internet access to install |
| CPR Release Notes | Right-click and choose "Save Target As..." |
To access CPR help, click here.
If you need a stand-alone CPR setup application for a host with no internet access, you can download it from here:
File |
|---|
| Stand-alone CPR Setup application for Windows (60 MB) - zip archive |
Redirector 3.1.0.4
If you need to control hardware handshaking lines directly on an MSS, ETS or SCSx00 product, the original Redirector is still available at the links below. These products use a proprietary protocol to control HW handshaking signals instead of TruPort Technology (RFC2217). Click one of the links below to download the v3.1.0.4 Redirector:
File | Comment |
|---|---|
| Redirector - zip archive | Obsolete - Use at your own risk |
| Release Notes | Right-click and choose "Save Target As..." |
Notification
...
[Originally Published On: 11/19/2003 04:52 PM]