...
The easiest way to install these files is to use DeviceInstaller, you can get it here:
DeviceInstaller: http://ltxfaq.custhelp.com/app/answers/detail/a_id/644 Latest version of DeviceInstaller
DeviceInstaller must be running on a PC on the same network as the Lantronix server, i.e. there must be no routers between them and on the same subnet.
...
- Click Next> to load the firmware (See Step 5 screenshot below to confirm that the firmware loaded successfully)
NOTE: To save the installation in an LXI file, click on the "Save Installation" button.
...
Note: When you run the upgrade Wizard, use the defaults settings to install the firmware (.ROM) file.
...
Part 2: Procedure to install the .COB (Web Manager) file: This procedure can be combined with the one above on non-IAP device servers, or when installing the Standard Tunnel firmware onto an IAP device server. See Part 3 below.
- Run DeviceInstaller
- Click the Search icon to find your Lantronix server. You should see a list of all the device servers on the left hand pane of DeviceInstaller.
- Highlight the device server's entry and expand the entry. Highlight the IP Address of the devcie server.
- Click the Upgrade icon at the top of DeviceInstaller below the menu, click Next through steps 1 and 2 (See Part 1 Step 1 above)
- Click the "Install files contained in COB partitions" button, then click Next> (See step 3 screensot below)
...
Part 3: Procedure to create a .lxi file to load multiple Device Server's (I.E. UDS1100's)
NOTE: Follow Steps 1 and 2 above to create an .lxi file to load the .ROM or .COB files separately or combine Steps 1 and 2 above and use the "save" button on the last screen of the upgrade wizard to create an .lxi file that will install both the .ROM and .COB file in one .lxi installation.
...